SensiFAST™ SYBR® No-ROX One-Step Kit

Cat No. Size List Price* Qty  
BIO-72001 100 x 20µl Reactions
BIO-72005 500 x 20µl Reactions
*For more information on pricing please contact us

Add to favorite products Email to a Friend Print View

SensiFAST™ SYBR® No-ROX One-Step Kit has been formulated for highly reproducible first-strand cDNA synthesis and subsequent real-time PCR in a single tube.

Featuring a combination of the latest advances in buffer chemistry, together with a reverse transcriptase and hot-start DNA polymerase system, the kit produces fast, highly-specific and ultra-sensitive one-step real-time RT-PCR.

Features & Benefits

  • Accurate quantification - hot-start capability reduces primer-dimer formation and saves time
  • Sensitive - achieve excellent results from difficult and low copy targets
  • Rapid - optimized proprietary enzyme and unique buffer chemistry for fast cycling
  • Flexible - compatible with all standard and fast cycling instruments

Instrument Compatibility

Roche LightCycler® 480 platform, Bio-Rad Opticon®, Opticon™2, Chromo4™, MiniOpticon™, CFX96™, CFX384™, Cepheid SmartCycler®, Qiagen Rotor-Gene™ 3000, 6000, Eppendorf Mastercycler® ep realplex and Techne Quantica®. (See product selection table).


SensiFAST SYBR® No-ROX One-Step Kit has been developed for fast real-time RT-PCR and has been validated on all commonly used real-time instruments. SensiFAST SYBR® No-ROX One-Step Kits are formulated for highly reproducible first-strand cDNA synthesis and subsequent real-time PCR in a single tube.

The antibody-mediated hot-start DNA polymerase system reduces the chances of primer/dimers formation. This allows a much greater dynamic range by removing competition for reaction components during amplification. This in turn results in greater reaction sensitivity.

Through the incorporation of the latest advances in buffer chemistry and enhancers SensiFAST SYBR® No-ROX One-Step Kit produces fast, highly-specific and reproducible one-step real-time RT-PCR (Fig. 1) SensiFAST SYBR® No-ROX One-Step Kit consists of a 2x SensiFAST SYBR® No-ROX One-Step mix, plus separate reverse transcriptase and RiboSafe RNase Inhibitor.

SensiFAST SYBR® No-ROX One-Step Kit is for use with real-time PCR instruments that do not require a passive reference.


SensiFAST is a trademark of Bioline.



100 x 20µl Reactions

500 x 20µl Reactions

SensiFAST SYBR® No-ROX One-Step mix (2x)

1 x 1ml

5 x 1ml

RiboSafe RNase Inhibitor

1 x 40µl

1 x 200µl

Reverse transcriptase

1 x 20µl

1 x 100µl


1 x 1.8ml

2 x 1.8ml


  • BIO-72001: 100 x 20µl Reactions: 1 x 1ml
  • BIO-72005: 500 x 20µl Reactions: 5 x 1ml

Storage & Stability

All kit components should be stored at -20°C upon receipt for optimum stability. Repeated freeze/thaw cycles should be avoided. Avoid exposure of the SYBR® Green I to light.

When stored under the recommended conditions and handled correctly, full activity of the kit is retained until the expiry date indicated on the outer box label.

Certificates of Analysis (COAs)

Certificates of Analysis for SensiFAST™ SYBR® No-ROX One-Step Kit are grouped by catalogue number and then listed by batch number. Larger pack sizes are listed first. To locate the COA for your product, first find the catalogue number and then the required batch number.

View all 30 COAs for SensiFAST™ SYBR® No-ROX One-Step Kit →

Frequently asked questions

  • What is the advantage of working with SYBR Green I?

      SYBR Green I is an inexpensive, universal dye which binds to all dsDNA. It can be easily used in combination with a simple primer pair to detect PCR products in real-time. This dye is very attractive for researchers analysing lots of different genes.

  • What is the advantage of working with a probe system?

      The probe system is always specific; only detect the gene of interest. It is also possible to distinguish between similar sequences with small differences like SNPs or mutations. In general, probe assays need less optimisation than SYBR Green I assays.

  • Can I use a SensiFAST Kit for standard real-time PCR?

      Although SensiFAST kits have been designed for fast PCR on the new generation of fast machines, they will work equally well for standard or fast PCR protocols on all real-time PCR machines.
  • Can I use a SensiFAST SYBR Kit for a probe assay?

      This is not possible because the SYBR is pre-mixed into the SensiFAST SYBR mastermix.
  • Why do the SensiFAST kits contain a hot-start Taq polymerase?

      Polymerase activity during the reaction set-up causes non-specific amplification including primer-dimer formation. To avoid non-specific amplification the polymerase is only activated after heating at 95°C for 2-3 minutes.
  • Why do you no longer sell kits contain dUTP (and UNG)?

      This is because it is because it is only effective if all the researchers either doing PCR in the laboratory or using the same thermocycler are also using a dUTP/dNTP and UNG system. If even one researcher is not, it ceases to be an effective control. Using dUTP has also been shown to be inefficient as it increases the Ct values by reducing reaction efficiency. Most labs do not need to use the dUTP method of control, optimised protocols will allow high specificity of PCR and good lab practices (using disposable consumables, the use of filter tips and maintaining a separate area for PCR set-up and PCR amplification and any post-PCR analysis) virtually eliminate the risk of cross contamination.
  • Why do certain kits contain a ROX passive reference?

      The emission recorded from ROX during the baseline cycles is used to normalize the emission recorded from the reporter (SYBR) in later cycles in some instruments. ROX compensates for small fluorescent fluctuations such as bubbles and well-to-well variations that may occur. Each of these instruments having the capacity to analyze the real-time PCR data with the passive reference signal either on or off.
  • Why are the ROX concentrations different?

      The amount of the ROX passive reference dye needed varies depending on the instrument optics, our SensiFAST kits have been optimised for these different instruments (see Product Selection Tool).
  • What is the difference between using ROX and using fluorescein?

      Fluorescein is an alternative passive reference dye used just in the Bio-Rad instruments (see Product Selection Tool), the SensiFAST SYBR & Fluorescein contains fluorescein premixed in the mastermix at optimised concentrations.
  • Is the SYBR in a separate tube?

      For your convenience the SensiFAST kits have an optimised amount of SYBR Green in the mastermix.
  • What is the difference between a one-step and a two-step real-time PCR reaction?

      In a one-step reaction the reverse transcription reaction and the real-time PCR reaction are done in one tube, making this a closed tube assay, so contamination can be avoided. It saves pipeting steps and time, and is easy in handling, making it ideal for high throughput screening.

      In a two-step reaction the reverse transcription reaction and the real-time PCR reaction are done in separate tubes. It gives a more flexible way of working in that the cDNA can be used for more than one real-time PCR reaction and can be archived, eliminating the need to continually isolate RNA. For convenience Bioline sells the SensiFAST cDNA Synthesis Kit separately if you wish to take a two-step approach.
  • What template (RNA/cDNA) is this compatible with?

      SensiFAST One-Step Kits can be used with most RNA/cDNA templates. To give you some idea of a few of the types of templates used with these kits:

      Human - Rosato R.R., et al. Cancer Res. 67: 9490-500 (2007)
      Rat - Remund K., et al. Expt. Lung Res. 35: 359-370 (2009)
      Drosophila - Brown A.E., et al. PloS ONE 4: e4490 (2009)
      Nitrogen-fixing bacteria - Bahlawane C., et al. Mol. Plant-Microbe Inter. 21: 1498-1509 (2008)
      Diphtheria bacteria - Jochmann N., et al. Microbiology 155: 1459-1477 (2009)
      Green algae - Wobbe L., et al. PNAS 106: 13290-13295 (2009)
      Bovine virus - Park S-I., et al. J. Virol. Methods. 159: 64-6 (2009)

      For cDNA/DNA templates SensiFAST SYBR and Probe kits are used. To give you some idea of a few of the types of templates used with these kits:

      Stem Cell - Bernardo A.S., et al. Stem Cells 27(2): 341 -351 (2008)
      Cow - Baumert A., et al. J. Dairy Research 76(3): 356-364 (2009)
      Mouse - Hoyles R.K., et al. Arthritis Rheum. 58(4): 1175-88 (2008)
      Quail - De Winter P., et al. British Poultry Science 49(5): 566 – 573 (2008)
      Insect - Bass C., et al. Malaria journal 6 111 (2007)
      Fish - Miller M.R., et al. J. Nutr. 138(11): 2179-2185 (2008)
      Crab - Wilcockson D.C. & Webster S.G. Gen. & Comp. Endo. 156: 113–125 (2008)
      Nematode - Murray S.L., et al. Mol. Plant-Microbe Interactions 20(11): 1431–1438 (2007)
      Plant - Hecht V., et al. Plant Physiology Preview DOI:10.1104/pp.107.096818 (2007)
      Yeast - Kawauchi J., et al. Genes & Dev. 22: 1082-1092 (2008)
      E.coli Bacteria - Saeed H.A., et al. Research J. Microbiology 4(4); 173-177 (2009)
      Virus - Muscillo M., et al. Water, Air, & Soil Pollution 191: 1-4 (2008)

Customer Testimonials

"After getting nowhere with other kits we tried the SensiFAST SYBR One-Step Kit and saw results first time, I cannot describe how wonderful this made us feel."

Other researchers use:

^ Back to Top