Cat No. Size List Price* Qty  
BIO-52082 50 Preps $350.00
BIO-52038 100 Preps $690.00
*For more information on pricing please contact us

Add to favorite products Email to a Friend Print View

ISOLATE Fecal DNA Kit is ideal for the simple, rapid isolation of high quality DNA from a variety of fecal samples including humans, birds, rats, mice, rabbits and cattle.

Bacterial, protist, as well as host DNA, can be rapidly and efficiently isolated from mammalian feces.

Features & Benefits

  • Fast - 15-minute isolation protocol
  • High quality - inhibitor-free DNA
  • Straight forward - no need for organic denaturants or proteinases
  • Universal - can be used with many different species


Isolation of fecal DNA from:

  • Human origin
  • Birds
  • Rodents (e.g. rats, mice)
  • Rabbits
  • Cattle

Isolated DNA is ready for downstream applications such as PCR, real-time PCR, microarrays, sequencing and genotyping.


The use of fecal material can be advantageous as it is non-invasive and large amounts can be collected. Even so, the isolation of DNA from feces can be challenging.

ISOLATE Fecal DNA Kit is specifically developed for the simple, rapid isolation of high quality DNA from a variety of fecal samples including humans, birds, rats, mice (fig. 1), rabbits, cattle, etc. Bacterial, protist, as well as host DNA, can be effectively isolated from ≤150mg sample of mammalian feces.

The easy to follow procedure can be completed in as little as 15 minutes. Fecal samples are added directly to a Bashing Beads Lysis Tube and rapidly lysed by bead beating in a vortex, without the use of organic denaturants or proteinases. The DNA is then bound, isolated and purified using spin columns.

The eluted DNA, free from contaminants and inhibitors, is ideal for downstream molecular biology applications including PCR (fig. 2), microarrays, sequencing and genotyping.



50 Reactions

100 Reactions

Lysis Buffer

1 x 40ml

2 x 40ml

DNA Pre-Wash Buffer

1 x 15ml

2 x 15ml

Fecal DNA Wash Buffer

1 x 50ml

2 x 50ml

Fecal DNA Binding Buffer

1 x  100ml

2 x 100ml

DNA Elution Buffer

1 x 10ml

2 x 10ml

Bashing Beads Lysis Tubes

1 x 50

2 x 50

Spin Filters (orange cap)

1 x 50

2 x 50

Spin Filters (green cap)

1 x 25

2 x 50

Spin Columns

1 x 50

2 x 50

Collection Tubes

2 x 100

2 x 200

Product Manual



Bench Protocol Sheet



Storage & Stability

All components should be stored dry and at room temperature. When stored under the recommended conditions and handled correctly, full activity of reagents is retained until the expiry date indicated on the outer box label.

Shipping conditions

Ambient temperature.

Certificates of Analysis (COAs)

Certificates of Analysis for ISOLATE Fecal DNA Kit are grouped by catalogue number and then listed by batch number. Larger pack sizes are listed first. To locate the COA for your product, first find the catalogue number and then the required batch number.

View all 3 COAs for ISOLATE Fecal DNA Kit →


  1. Treatment failure in patients with chronic Blastocystis infection
    Roberts, T., Ellis, J., Harkness, J., Marriott, D., Stark, D.
  2. Nematode community structure in the brush-tailed rock-wallaby, Petrogale penicillata: implications of captive breeding and the translocation of wildlife
    Lott, M.J., Eldridge, M.D.B., Hose, G.C., Power, M.L.
  3. Fifteen microsatellite loci for use in non-invasive sampling studies of the antilopine wallaroo (Macropus antilopinus)
    Wadley, J.J., Austin, J.J., Gardner, M.G., Fordham, D.A.
  4. Molecular epidemiology, spatiotemporal analysis, and ecology of sporadic human cryptosporidiosis in Australia
    Waldron, L.S., Dimeski, B., Beggs, P.J., Ferrari, B.C., Power, M.L.
  5. Microbial dysbiosis in pediatric patients with Crohn's disease
    Kaakoush, N.O., Day, A.S., Huinao, K.D., Leach, S.T., Lemberg, D.A., Dowd, S.E., Mitchell, H.M.

Frequently asked questions

  • The sequencing protocol I am using says that I have to have my DNA suspended in pure water. Do I have to use the elution buffer supplied with the kit?

      The elution buffer is ideal for applications such as restriction enzyme digestion, sequencing and PCR. It is possible to use DNase free water for elution, but you should expect a slightly lower yield
  • I made my PCR product using RANGER DNA polymerase; it is more than 5kb long. Can I still use the ISOLATE II PCR and Gel Kit to purify the product away from the primers?

      Yes, though this may require some optimisation. Warming the elution buffer to 50 or even 70°C before applying it to the column can help to elute long PCR products, but there is the possibility using this adaptation to the protocol that the primers will be eluted too.
  • I have mutagenized my gene of interest using PCR with relatively long primers (> 30bp). Is the ISOLATE II PCR and Gel Kit suitable for removing excess primers and dNTPs from the reaction?

      The ISOLATE II PCR and Gel Kit can be used under standard conditions to separate most PCR primers away from their product. A primer of only 30bp is efficiently separated, but longer mutagenic primers of around 100bp may be separated from the PCR buffer along with the amplicon.
  • My strain of E. coli contains a low copy plasmid. How can I isolate the plasmid DNA?

      The high quality of the columns used in the ISOLATE II kits, including the miniprep kit, allow larger volumes of culture media to be used as starting material. The exact volume to be used depends on the strain and plasmid used in the experiment, but the miniprep columns will cope with the biomass from 5ml of E. coli grown in LB to an OD600 of around 3. When using larger volumes of culture medium, it is important to ensure that as much spent medium as possible is removed from above the biomass pellet after spinning down the culture. If care is taken, up to 15ml of bacterial culture medium can be used as a starting material, which should give a better yield of low copy plasmid DNA. However, double the volumes of buffers P1, P2 and P3 should be used compared to the standard protocol.
  • My plasmid yield from using the ISOLATE II Plasmid Mini Kit is very low, what could be the cause of this?

      The most frequent cause of low yield is that the biomass pellet is not resuspended properly prior to lysis. Clumps of bacteria mean that the lysis solution cannot access all the cells and these unlysed cells are then spun down later in the process. Low yield can also be caused by incomplete transfer of the cleared lysate to column, especially when the white precipitate made on the addition of buffer P3 is loose, making it hard to retrieve the maximum amount of lysate. Counterintuitively, very high biomass concentrations can lead to low plasmid yield. This can be because the column becomes overloaded, so the yield per mg biomass is less than expected. However use of rich media such as SOC or TY instead of LB can give high biomass but very low plasmid concentration.
  • Another lab has sent me a plasmid, but the purity looks low. Can I use your ISOLATE II Plasmid Mini Kit to clean up the plasmid?

      The ISOLATE II Plasmid Mini Kit can be used to both purify and concentrate naked plasmid DNA. The DNA can be loaded directly onto a fresh column then the remaining washing, drying and elution steps followed as for the standard protocol. The sample can be concentrated by reducing the elution volume in the final stage. However, a better recovery can be obtained by using the ISOLATE II PCR and Gel Kit and treating the plasmid sample as though it were a PCR product.
  • Can I use a gel to quantify RNA isolated using the ISOLATE II RNA kits?

      Agarose gel analysis of RNA samples can be both valuable and misleading. The pattern of bands on the gel can be indicative of the quality of the sample, but equally it can also only indicate that the gel tank, buffer or agarose is contaminated with RNase. A safer measure is to use a spectrophotometer (ideally a microfluidic one) to determine the ratio of A260 to A280 for purity determination. Some microfluidic devices can also give an estimate of the integrity of the RNA. All these methods give an idea of the quality of total RNA which tends to be dominated with rRNA and tRNA. It is not uncommon for an agarose gel to show an abundance of 18S and 23S rRNA but on analysis for there to be little of the transcript of interest. Ideally RNA quality control should include an assessment of the presence of common transcripts (from reference genes, such as GAPDH) using RT-PCR or RT-qPCR.

      If the yield of RNA is low, it is best to first check that all the solutions used and the equipment employed is largely free of RNase. Solutions should be prepared with the highest quality reagents available, preferably ones that have a certificate of analysis to show that they are free of DNase, and RNase. If there is confidence that RNase contamination is at a minimum then it may be worth ensuring that the sample is properly homogenised before lysis, and to check a sample of the lysed material under a light microscope to ensure that all the cells are disrupted.

      RNA samples that have been contaminated with RNase (either during processing or those that have been sent from another lab) can be purified using the ISOLATE II RNA Micro Kit.
  • Can I use columns or solutions from one kit in another one?

      The columns supplied with the ISOLATE II kits are superficially similar, but each type has been optimized to work within the buffer system supplied with the corresponding kit. The swapping of columns (or buffers) between kits may lead to no recovery of nucleic acid whatsoever, or at the very least severely impaired purification.

Customer Testimonials

Aim: To compare the sensitivity of two commercial faecal DNA extraction kits for the detection and quantification of human hookworms (Ancylostoma ceylanicum, Ancylostoma duodenale and Necator americanus) eggs in faeces.

Methods: Ten individual human faecal samples positive for hookworm eggs were each extracted with two commercial kits, the Powersoil DNA Isolation Kit (MoBio) and the Isolate Faecal DNA Kit (Bioline) according to manufacturer's instructions. DNA was eluted to 100 ul for each.

DNA was subjected to multiplex Taq-man based multiplex qPCR (unpublished) targeting the internal transcribed spacer regions of the three human hookworms and an internal control (EHV4).

Results: Both kits performed equivocally in positively detecting at least one species of hookworm in all ten samples. The Isolate Faecal DNA Kit (Bioline) produced on average 0.5 Ct lower threshold cycles for samples compared to the Powersoil DNA Isolation Kit (MoBio). The time taken to extract 10 samples was significantly less for the Bioline product.

Conclusion: The Powersoil DNA Isolation Kit (MoBio) and the Isolate Faecal DNA Kit (Bioline) are comparable in terms of sensitivity for detecting and quantifying DNA of hookworms from human faecal samples. The Bioline kit was less labour intensive compared to the Mo Bio kit and is more competitively priced.

Other researchers use:

^ Back to Top